62 lines
1.8 KiB
Desktop File
Executable File
62 lines
1.8 KiB
Desktop File
Executable File
# apt install --no-install-recommends libqmi-utils
|
|
# cp -v ./qmi-network@.service /etc/systemd/system/
|
|
# systemctl daemon-reload
|
|
# systemctl enable --now qmi-network@0
|
|
|
|
# This will NOT work without a .network for your wwan device.
|
|
[Unit]
|
|
Description=qmi-network for cdc-wdm%i device
|
|
|
|
Before=freepbx.service
|
|
Before=asterisk.service
|
|
|
|
After=sys-subsystem-net-devices-wwan%i.device
|
|
Wants=sys-subsystem-net-devices-wwan%i.device
|
|
|
|
[Service]
|
|
Type=simple
|
|
Restart=always
|
|
TimeoutSec=300s
|
|
|
|
# Leave the following blank/as-is for auto-detection.
|
|
# Internet APN.
|
|
Environment=APN=""
|
|
# APN Username.
|
|
Environment=APN_USER=""
|
|
# APN Password.
|
|
Environment=APN_PASS=""
|
|
# IP type is usually 4, 6 or 4|6.
|
|
Environment=IP_TYPE="4|6"
|
|
# Change to yes to use qmi proxy.
|
|
Environment=PROXY="no"
|
|
|
|
# Make sure the state is cleared before starting.
|
|
ExecStartPre=-rm /tmp/qmi-network-state-cdc-wdm%i
|
|
|
|
# Stop wwan so it can be reconfigured.
|
|
ExecStartPre=networkctl down wwan%i
|
|
|
|
# Raw IP must be enabled.
|
|
ExecStartPre=sh -c "echo 'Y' | tee /sys/class/net/wwan%i/qmi/raw_ip"
|
|
|
|
# Start the network via qmi-network scripts.
|
|
# As some networks and/or devices take a long time to connect we should
|
|
# give it some time to be ready before starting the connection process.
|
|
ExecStartPre=-sh -e -c "sleep 60; qmi-network /dev/cdc-wdm%i start"
|
|
|
|
# Bring up the network.
|
|
ExecStartPre=networkctl up wwan%i
|
|
|
|
# Small loop as the main process to watchdog the connection.
|
|
# (NOTE: DHCP must be given a little time to settle before pinging).
|
|
ExecStart=sh -e -c "sleep 10; while true; do ping -w 120 -I wwan%i -c 5 one.one.one.one; sleep 300; done;"
|
|
|
|
# Stop.. DOWN TIME!
|
|
ExecStop=networkctl down wwan%i
|
|
ExecStop=qmi-network /dev/cdc-wdm%i stop
|
|
# Be sure the network state is cleared on stop too.
|
|
ExecStop=-rm /tmp/qmi-network-state-cdc-wdm%i
|
|
|
|
[Install]
|
|
WantedBy=sys-subsystem-net-devices-wwan%i.device
|