diff --git a/asterisk/conf/mobile/asterisk.conf b/asterisk/conf/mobile/asterisk.conf new file mode 100644 index 0000000..44ca704 --- /dev/null +++ b/asterisk/conf/mobile/asterisk.conf @@ -0,0 +1,25 @@ +; +; /etc/asterisk/asterisk.conf +; +; Directories are standard. +[directories] +astcachedir => /var/cache/asterisk +astetcdir => /etc/asterisk +astmoddir => /usr/lib/asterisk/modules +astvarlibdir => /var/lib/asterisk +astdbdir => /var/lib/asterisk +astkeydir => /var/lib/asterisk +astdatadir => /var/lib/asterisk +astagidir => /var/lib/asterisk/agi-bin +astspooldir => /var/spool/asterisk +astrundir => /var/run/asterisk +astlogdir => /var/log/asterisk +astsbindir => /usr/sbin + +; We'll run asterisk under its own user and group. +runuser = asterisk +rungroup = asterisk + +; Main language. +languageprefix = yes +defaultlanguage = en_GB diff --git a/asterisk/conf/mobile/indications.conf b/asterisk/conf/mobile/indications.conf new file mode 100644 index 0000000..89fb053 --- /dev/null +++ b/asterisk/conf/mobile/indications.conf @@ -0,0 +1,747 @@ +; +; /etc/asterisk/indications.conf +; +; Configuration file for location specific tone indications +; + +; +; NOTE: +; When adding countries to this file, please keep them in alphabetical +; order according to the 2-character country codes! +; +; The [general] category is for certain global variables. +; All other categories are interpreted as location specific indications +; + +[general] +country=uk ; default location + + +; [example] +; description = string +; The full name of your country, in English. +; ringcadence = num[,num]* +; List of durations the physical bell rings. +; dial = tonelist +; Set of tones to be played when one picks up the hook. +; busy = tonelist +; Set of tones played when the receiving end is busy. +; congestion = tonelist +; Set of tones played when there is some congestion (on the network?) +; callwaiting = tonelist +; Set of tones played when there is a call waiting in the background. +; dialrecall = tonelist +; Not well defined; many phone systems play a recall dial tone after hook +; flash. +; record = tonelist +; Set of tones played when call recording is in progress. +; info = tonelist +; Set of tones played with special information messages (e.g., "number is +; out of service") +; 'name' = tonelist +; Every other variable will be available as a shortcut for the "PlayList" command +; but will not be used automatically by Asterisk. +; +; +; The tonelist itself is defined by a comma-separated sequence of elements. +; Each element consist of a frequency (f) with an optional duration (in ms) +; attached to it (f/duration). The frequency component may be a mixture of two +; frequencies (f1+f2) or a frequency modulated by another frequency (f1*f2). +; The implicit modulation depth is fixed at 90%, though. +; If the list element starts with a !, that element is NOT repeated, +; therefore, only if all elements start with !, the tonelist is time-limited, +; all others will repeat indefinitely. +; +; concisely: +; element = [!]freq[+|*freq2][/duration] +; tonelist = element[,element]* +; + +[at] +description = Austria +ringcadence = 1000,5000 +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +dial = 420 +busy = 420/400,0/400 +ring = 420/1000,0/5000 +congestion = 420/200,0/200 +callwaiting = 420/40,0/1960 +dialrecall = 420 +; RECORDTONE - not specified +record = 1400/80,0/14920 +info = 950/330,1450/330,1850/330,0/1000 +stutter = 380+420 + +[au] +description = Australia +; Reference http://www.acif.org.au/__data/page/3303/S002_2001.pdf +; Normal Ring +ringcadence = 400,200,400,2000 +; Distinctive Ring 1 - Forwarded Calls +; 400,400,200,200,400,1400 +; Distinctive Ring 2 - Selective Ring 2 + Operator + Recall +; 400,400,200,2000 +; Distinctive Ring 3 - Multiple Subscriber Number 1 +; 200,200,400,2200 +; Distinctive Ring 4 - Selective Ring 1 + Centrex +; 400,2600 +; Distinctive Ring 5 - Selective Ring 3 +; 400,400,200,400,200,1400 +; Distinctive Ring 6 - Multiple Subscriber Number 2 +; 200,400,200,200,400,1600 +; Distinctive Ring 7 - Multiple Subscriber Number 3 + Data Privacy +; 200,400,200,400,200,1600 +; Tones +dial = 413+438 +busy = 425/375,0/375 +ring = 413+438/400,0/200,413+438/400,0/2000 +; XXX Congestion: Should reduce by 10 db every other cadence XXX +congestion = 425/375,0/375,420/375,0/375 +callwaiting = 425/200,0/200,425/200,0/4400 +dialrecall = 413+438 +; Record tone used for Call Intrusion/Recording or Conference +record = !425/1000,!0/15000,425/360,0/15000 +info = 425/2500,0/500 +; Other Australian Tones +; The STD "pips" indicate the call is not an untimed local call +std = !525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100,!0/100,!525/100 +; Facility confirmation tone (eg. Call Forward Activated) +facility = 425 +; Message Waiting "stutter" dialtone +stutter = 413+438/100,0/40 +; Ringtone for calls to Telstra mobiles +ringmobile = 400+450/400,0/200,400+450/400,0/2000 + +[bg] +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +description = Bulgaria +ringcadence = 1000,4000 +; +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/250,0/250 +callwaiting = 425/150,0/150,425/150,0/4000 +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +record = 1400/425,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +stutter = 425/1500,0/100 + +[br] +description = Brazil +ringcadence = 1000,4000 +dial = 425 +busy = 425/250,0/250 +ring = 425/1000,0/4000 +congestion = 425/250,0/250,425/750,0/250 +callwaiting = 425/50,0/1000 +; Dialrecall not used in Brazil standard (using UK standard) +dialrecall = 350+440 +; Record tone is not used in Brazil, use busy tone +record = 425/250,0/250 +; Info not used in Brazil standard (using UK standard) +info = 950/330,1400/330,1800/330 +stutter = 350+440 + +[be] +description = Belgium +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,3000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/3000 +congestion = 425/167,0/167 +callwaiting = 1400/175,0/175,1400/175,0/3500 +; DIALRECALL - not specified +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +; RECORDTONE - not specified +record = 1400/500,0/15000 +info = 900/330,1400/330,1800/330,0/1000 +stutter = 425/1000,0/250 + +[ch] +description = Switzerland +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/200,0/200,425/200,0/4000 +; DIALRECALL - not specified +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +; RECORDTONE - not specified +record = 1400/80,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +stutter = 425+340/1100,0/1100 + +[cl] +description = Chile +; According to specs from Telefonica CTC Chile +ringcadence = 1000,3000 +dial = 400 +busy = 400/500,0/500 +ring = 400/1000,0/3000 +congestion = 400/200,0/200 +callwaiting = 400/250,0/8750 +dialrecall = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 +record = 1400/500,0/15000 +info = 950/333,1400/333,1800/333,0/1000 +stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 + +[cn] +description = China +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 450 +busy = 450/350,0/350 +ring = 450/1000,0/4000 +congestion = 450/700,0/700 +callwaiting = 450/400,0/4000 +dialrecall = 450 +record = 950/400,0/10000 +info = 450/100,0/100,450/100,0/100,450/100,0/100,450/400,0/400 +; STUTTER - not specified +stutter = 450+425 + +[cz] +description = Czech Republic +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425/330,0/330,425/660,0/660 +busy = 425/330,0/330 +ring = 425/1000,0/4000 +congestion = 425/165,0/165 +callwaiting = 425/330,0/9000 +; DIALRECALL - not specified +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425/330,0/330,425/660,0/660 +; RECORDTONE - not specified +record = 1400/500,0/14000 +info = 950/330,0/30,1400/330,0/30,1800/330,0/1000 +; STUTTER - not specified +stutter = 425/450,0/50 + +[de] +description = Germany +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425 +busy = 425/480,0/480 +ring = 425/1000,0/4000 +congestion = 425/240,0/240 +callwaiting = !425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,!0/5000,!425/200,!0/200,!425/200,0 +; DIALRECALL - not specified +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +; RECORDTONE - not specified +record = 1400/80,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +stutter = 425+400 + +[dk] +description = Denmark +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = !425/200,!0/600,!425/200,!0/3000,!425/200,!0/200,!425/200,0 +; DIALRECALL - not specified +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +; RECORDTONE - not specified +record = 1400/80,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +; STUTTER - not specified +stutter = 425/450,0/50 + +[ee] +description = Estonia +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425 +busy = 425/300,0/300 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +; CALLWAIT not in accordance to ITU +callwaiting = 950/650,0/325,950/325,0/30,1400/1300,0/2600 +; DIALRECALL - not specified +dialrecall = 425/650,0/25 +; RECORDTONE - not specified +record = 1400/500,0/15000 +; INFO not in accordance to ITU +info = 950/650,0/325,950/325,0/30,1400/1300,0/2600 +; STUTTER not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[es] +description = Spain +ringcadence = 1500,3000 +dial = 425 +busy = 425/200,0/200 +ring = 425/1500,0/3000 +congestion = 425/200,0/200,425/200,0/200,425/200,0/600 +callwaiting = 425/175,0/175,425/175,0/3500 +dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425 +record = 1400/500,0/15000 +info = 950/330,0/1000 +dialout = 500 +; STUTTER not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + + +[fi] +description = Finland +ringcadence = 1000,4000 +dial = 425 +busy = 425/300,0/300 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/150,0/150,425/150,0/8000 +dialrecall = 425/650,0/25 +record = 1400/500,0/15000 +info = 950/650,0/325,950/325,0/30,1400/1300,0/2600 +stutter = 425/650,0/25 + +[fr] +description = France +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1500,3500 +; Dialtone can also be 440+330 +dial = 440 +busy = 440/500,0/500 +ring = 440/1500,0/3500 +; CONGESTION - not specified +congestion = 440/250,0/250 +callwait = 440/300,0/10000 +; DIALRECALL - not specified +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +; RECORDTONE - not specified +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330 +stutter = !440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,!440/100,!0/100,440 + +[gr] +description = Greece +ringcadence = 1000,4000 +dial = 425/200,0/300,425/700,0/800 +busy = 425/300,0/300 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/150,0/150,425/150,0/8000 +dialrecall = 425/650,0/25 +record = 1400/400,0/15000 +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 +stutter = 425/650,0/25 + +[hu] +description = Hungary +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1250,3750 +dial = 425 +busy = 425/300,0/300 +ring = 425/1250,0/3750 +congestion = 425/300,0/300 +callwaiting = 425/40,0/1960 +dialrecall = 425+450 +; RECORDTONE - not specified +record = 1400/400,0/15000 +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 +stutter = 350+375+400 + +[id] +description = Indonesia +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/250,0/250 +callwaiting = 425/150,0/150,425/150,0/10000 +info = !950/330,!1400/330,!1800/330,0/1000 + +[il] +description = Israel +ringcadence = 1000,3000 +dial = 414 +busy = 414/500,0/500 +ring = 414/1000,0/3000 +congestion = 414/250,0/250 +callwaiting = 414/100,0/100,414/100,0/100,414/600,0/3000 +dialrecall = !414/100,!0/100,!414/100,!0/100,!414/100,!0/100,414 +record = 1400/500,0/15000 +info = 1000/330,1400/330,1800/330,0/1000 +stutter = !414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,!414/160,!0/160,414 + + +[in] +description = India +ringcadence = 400,200,400,2000 +dial = 400*25 +busy = 400/750,0/750 +ring = 400*25/400,0/200,400*25/400,0/2000 +congestion = 400/250,0/250 +callwaiting = 400/200,0/100,400/200,0/7500 +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,0/1000 +stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,400*25 + +[it] +description = Italy +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +dial = 425/200,0/200,425/600,0/1000 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/400,0/100,425/250,0/100,425/150,0/14000 +dialrecall = 470/400,425/400 +record = 1400/400,0/15000 +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 +stutter = 470/400,425/400 + +[lt] +description = Lithuania +ringcadence = 1000,4000 +dial = 425 +busy = 425/350,0/350 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/150,0/150,425/150,0/4000 +; DIALRECALL - not specified +dialrecall = 425/500,0/50 +; RECORDTONE - not specified +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 +; STUTTER - not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[jp] +description = Japan +ringcadence = 1000,2000 +dial = 400 +busy = 400/500,0/500 +ring = 400+15/1000,0/2000 +congestion = 400/500,0/500 +callwaiting = 400+16/500,0/8000 +dialrecall = !400/200,!0/200,!400/200,!0/200,!400/200,!0/200,400 +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,0 +stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 + +[mx] +description = Mexico +ringcadence = 2000,4000 +dial = 425 +busy = 425/250,0/250 +ring = 425/1000,0/4000 +congestion = 425/250,0/250 +callwaiting = 425/200,0/600,425/200,0/10000 +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +record = 1400/500,0/15000 +info = 950/330,0/30,1400/330,0/30,1800/330,0/1000 +stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,425 + +[my] +description = Malaysia +ringcadence = 2000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/400,0/200,425/400,0/2000 +congestion = 425/500,0/500 +; STUTTER - not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[nl] +description = Netherlands +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +ringcadence = 1000,4000 +; Most of these 425's can also be 450's +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/250,0/250 +callwaiting = 425/500,0/9500 +; DIALRECALL - not specified +dialrecall = 425/500,0/50 +; RECORDTONE - not specified +record = 1400/500,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +stutter = 425/500,0/50 + +[no] +description = Norway +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/200,0/200 +callwaiting = 425/200,0/600,425/200,0/10000 +dialrecall = 470/400,425/400 +record = 1400/400,0/15000 +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,0 +stutter = 470/400,425/400 + +[nz] +description = New Zealand +; Reference = http://www.telepermit.co.nz/TNA102.pdf +ringcadence = 400,200,400,2000 +dial = 400 +busy = 400/500,0/500 +ring = 400+450/400,0/200,400+450/400,0/2000 +congestion = 400/250,0/250 +callwaiting = !400/200,!0/3000,!400/200,!0/3000,!400/200,!0/3000,!400/200 +dialrecall = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 +record = 1400/425,0/15000 +info = 400/750,0/100,400/750,0/100,400/750,0/100,400/750,0/400 +stutter = !400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,!400/100,!0/100,400 +unobtainable = 400/75,0/100,400/75,0/100,400/75,0/100,400/75,0/400 + +[ph] + +; reference http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf + +description = Philippines +ringcadence = 1000,4000 +dial = 425 +busy = 480+620/500,0/500 +ring = 425+480/1000,0/4000 +congestion = 480+620/250,0/250 +callwaiting = 440/300,0/10000 +; DIALRECALL - not specified +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +; RECORDTONE - not specified +record = 1400/500,0/15000 +; INFO - not specified +info = !950/330,!1400/330,!1800/330,0 +; STUTTER - not specified +stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,425 + + +[pl] +description = Poland +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/500,0/500 +callwaiting = 425/150,0/150,425/150,0/4000 +; DIALRECALL - not specified +dialrecall = 425/500,0/50 +; RECORDTONE - not specified +record = 1400/500,0/15000 +; 950/1400/1800 3x0.33 on 1.0 off repeated 3 times +info = !950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000,!950/330,!1400/330,!1800/330,!0/1000 +; STUTTER - not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[pt] +description = Portugal +ringcadence = 1000,5000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/5000 +congestion = 425/200,0/200 +callwaiting = 440/300,0/10000 +dialrecall = 425/1000,0/200 +record = 1400/500,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[ru] +; References: +; http://www.minsvyaz.ru/site.shtml?id=1806 +; http://www.aboutphone.info/lib/gost/45-223-2001.html +description = Russian Federation / ex Soviet Union +ringcadence = 1000,4000 +dial = 425 +busy = 425/350,0/350 +ring = 425/1000,0/4000 +congestion = 425/175,0/175 +callwaiting = 425/200,0/5000 +record = 1400/400,0/15000 +info = 950/330,1400/330,1800/330,0/1000 +dialrecall = 425/400,0/40 +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + +[se] +description = Sweden +ringcadence = 1000,5000 +dial = 425 +busy = 425/250,0/250 +ring = 425/1000,0/5000 +congestion = 425/250,0/750 +callwaiting = 425/200,0/500,425/200,0/9100 +dialrecall = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +record = 1400/500,0/15000 +info = !950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,!0/2024,!950/332,!0/24,!1400/332,!0/24,!1800/332,0 +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 +; stutter = 425/320,0/20 ; Real swedish standard, not used for now + +[sg] +description = Singapore +; Singapore +; Reference: http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf +; Frequency specs are: 425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation depth 100%; SIT +/- 50Hz +ringcadence = 400,200,400,2000 +dial = 425 +ring = 425*24/400,0/200,425*24/400,0/2000 ; modulation should be 100%, not 90% +busy = 425/750,0/750 +congestion = 425/250,0/250 +callwaiting = 425*24/300,0/200,425*24/300,0/3200 +stutter = !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425 +info = 950/330,1400/330,1800/330,0/1000 ; not currently in use acc. to reference +dialrecall = 425*24/500,0/500,425/500,0/2500 ; unspecified in IDA reference, use repeating Holding Tone A,B +record = 1400/500,0/15000 ; unspecified in IDA reference, use 0.5s tone every 15s +; additionally defined in reference +nutone = 425/2500,0/500 +intrusion = 425/250,0/2000 +warning = 425/624,0/4376 ; end of period tone, warning +acceptance = 425/125,0/125 +holdinga = !425*24/500,!0/500 ; followed by holdingb +holdingb = !425/500,!0/2500 + +[th] +description = Thailand +ringcadence = 1000,4000 +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +dial = 400*50 +busy = 400/500,0/500 +ring = 420/1000,0/5000 +congestion = 400/300,0/300 +callwaiting = 1000/400,10000/400,1000/400 +; DIALRECALL - not specified - use special dial tone instead. +dialrecall = 400*50/400,0/100,400*50/400,0/100 +; RECORDTONE - not specified +record = 1400/500,0/15000 +; INFO - specified as an announcement - use special information tones instead +info = 950/330,1400/330,1800/330 +; STUTTER - not specified +stutter = !400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,!400/200,!0/200,!400/600,!0/200,400 + +[uk] +description = United Kingdom +ringcadence = 400,200,400,2000 +; These are the official tones taken from BT SIN350. The actual tones +; used by BT include some volume differences so sound slightly different +; from Asterisk-generated ones. +dial = 350+440 +; Special dial is the intermittent dial tone heard when, for example, +; you have a divert active on the line +specialdial = 350+440/750,440/750 +; Busy is also called "Engaged" +busy = 400/375,0/375 +; "Congestion" is the Beep-bip engaged tone +congestion = 400/400,0/350,400/225,0/525 +; "Special Congestion" is not used by BT very often if at all +specialcongestion = 400/200,1004/300 +unobtainable = 400 +ring = 400+450/400,0/200,400+450/400,0/2000 +callwaiting = 400/100,0/4000 +; BT seem to use "Special Call Waiting" rather than just "Call Waiting" tones +specialcallwaiting = 400/250,0/250,400/250,0/250,400/250,0/5000 +; "Pips" used by BT on payphones. (Sounds wrong, but this is what BT claim it +; is and I've not used a payphone for years) +creditexpired = 400/125,0/125 +; These two are used to confirm/reject service requests on exchanges that +; don't do voice announcements. +confirm = 1400 +switching = 400/200,0/400,400/2000,0/400 +; This is the three rising tones Doo-dah-dee "Special Information Tone", +; usually followed by the BT woman saying an appropriate message. +info = 950/330,0/15,1400/330,0/15,1800/330,0/1000 +; Not listed in SIN350 +record = 1400/500,0/60000 +stutter = 350+440/750,440/750 + +[us] +description = United States / North America +ringcadence = 2000,4000 +dial = 350+440 +busy = 480+620/500,0/500 +ring = 440+480/2000,0/4000 +congestion = 480+620/250,0/250 +callwaiting = 440/300,0/10000 +dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,0 +stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 + +[us-old] +description = United States Circa 1950/ North America +ringcadence = 2000,4000 +dial = 600*120 +busy = 500*100/500,0/500 +ring = 420*40/2000,0/4000 +congestion = 500*100/250,0/250 +callwaiting = 440/300,0/10000 +dialrecall = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120 +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,0 +stutter = !600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,!600*120/100,!0/100,600*120 + +[tw] +description = Taiwan +; http://nemesis.lonestar.org/reference/telecom/signaling/dialtone.html +; http://nemesis.lonestar.org/reference/telecom/signaling/busy.html +; http://www.iproducts.com.tw/ee/kylink/06ky-1000a.htm +; http://www.pbx-manufacturer.com/ky120dx.htm +; http://www.nettwerked.net/tones.txt +; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/taiw_sup/taiw2.htm +; +; busy tone 480+620Hz 0.5 sec. on ,0.5 sec. off +; reorder tone 480+620Hz 0.25 sec. on,0.25 sec. off +; ringing tone 440+480Hz 1 sec. on ,2 sec. off +; +ringcadence = 1000,4000 +dial = 350+440 +busy = 480+620/500,0/500 +ring = 440+480/1000,0/2000 +congestion = 480+620/250,0/250 +callwaiting = 350+440/250,0/250,350+440/250,0/3250 +dialrecall = 300/1500,0/500 +record = 1400/500,0/15000 +info = !950/330,!1400/330,!1800/330,0 +stutter = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440 + +[ve] +; Tone definition source for ve found on +; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf +description = Venezuela / South America +ringcadence = 1000,4000 +dial = 425 +busy = 425/500,0/500 +ring = 425/1000,0/4000 +congestion = 425/250,0/250 +callwaiting = 400+450/300,0/6000 +dialrecall = 425 +record = 1400/500,0/15000 +info = !950/330,!1440/330,!1800/330,0/1000 +; STUTTER - not specified +stutter = !425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425 + + +[za] +description = South Africa +; http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/vco_prod/safr_sup/saf02.htm +; (definitions for other countries can also be found there) +; Note, though, that South Africa uses two switch types in their network -- +; Alcatel switches -- mainly in the Western Cape, and Siemens elsewhere. +; The former use 383+417 in dial, ringback etc. The latter use 400*33 +; I've provided both, uncomment the ones you prefer +ringcadence = 400,200,400,2000 +; dial/ring/callwaiting for the Siemens switches: +dial = 400*33 +ring = 400*33/400,0/200,400*33/400,0/2000 +callwaiting = 400*33/250,0/250,400*33/250,0/250,400*33/250,0/250,400*33/250,0/250 +; dial/ring/callwaiting for the Alcatel switches: +; dial = 383+417 +; ring = 383+417/400,0/200,383+417/400,0/2000 +; callwaiting = 383+417/250,0/250,383+417/250,0/250,383+417/250,0/250,383+417/250,0/250 +congestion = 400/250,0/250 +busy = 400/500,0/500 +dialrecall = 350+440 +; XXX Not sure about the RECORDTONE +record = 1400/500,0/10000 +info = 950/330,1400/330,1800/330,0/330 +stutter = !400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,!400*33/100,!0/100,400*33 diff --git a/asterisk/conf/mobile/logger.conf b/asterisk/conf/mobile/logger.conf new file mode 100644 index 0000000..5f8dcb4 --- /dev/null +++ b/asterisk/conf/mobile/logger.conf @@ -0,0 +1,200 @@ +; +; /etc/asterisk/logger.conf +; +; Logging Configuration +; +; In this file, you configure logging to files or to +; the syslog system. +; +; "logger reload" at the CLI will reload configuration +; of the logging system. + +[general] +; +; Customize the display of debug message time stamps +; this example is the ISO 8601 date format (yyyy-mm-dd HH:MM:SS) +; +; see strftime(3) Linux manual for format specifiers. Note that there is also +; a fractional second parameter which may be used in this field. Use %1q +; for tenths, %2q for hundredths, etc. +; +;dateformat=%F %T ; ISO 8601 date format +;dateformat=%F %T.%3q ; with milliseconds +; +; +; This makes Asterisk write callids to log messages +; (defaults to yes) +;use_callids = no +; +; This appends the hostname to the name of the log files. +;appendhostname = yes +; +; This determines whether or not we log queue events to a file +; (defaults to yes). +;queue_log = no +; +; Determines whether the queue_log always goes to a file, even +; when a realtime backend is present (defaults to no). +;queue_log_to_file = yes +; +; Set the queue_log filename +; (defaults to queue_log) +;queue_log_name = queue_log +; +; When using realtime for the queue log, use GMT for the timestamp +; instead of localtime. The default of this option is 'no'. +;queue_log_realtime_use_gmt = no +; +; Log rotation strategy: +; none: Do not perform any logrotation at all. You should make +; very sure to set up some external logrotate mechanism +; as the asterisk logs can get very large, very quickly. +; sequential: Rename archived logs in order, such that the newest +; has the highest sequence number [default]. When +; exec_after_rotate is set, ${filename} will specify +; the new archived logfile. +; rotate: Rotate all the old files, such that the oldest has the +; highest sequence number [this is the expected behavior +; for Unix administrators]. When exec_after_rotate is +; set, ${filename} will specify the original root filename. +; timestamp: Rename the logfiles using a timestamp instead of a +; sequence number when "logger rotate" is executed. +; When exec_after_rotate is set, ${filename} will +; specify the new archived logfile. +;rotatestrategy = rotate + +;~ +rotatestrategy = rotate + +; +; Run a system command after rotating the files. This is mainly +; useful for rotatestrategy=rotate. The example allows the last +; two archive files to remain uncompressed, but after that point, +; they are compressed on disk. +; +;exec_after_rotate=gzip -9 ${filename}.2 + +;~ +exec_after_rotate=gzip -9 ${filename}.2 + +; +; +; For each file, specify what to log. +; +; For console logging, you set options at start of +; Asterisk with -v for verbose and -d for debug +; See 'asterisk -h' for more information. +; +; Directory for log files is configures in asterisk.conf +; option astlogdir +; +; All log messages go to a queue serviced by a single thread +; which does all the IO. This setting controls how big that +; queue can get (and therefore how much memory is allocated) +; before new messages are discarded. +; The default is 1000 +;logger_queue_limit = 250 +; +; Any custom logging levels you may want to use, which can then +; be sent to logging channels. The maximum number of custom +; levels is 16, but not all of these may be available if modules +; in Asterisk define their own. +;custom_levels = foobar,important,compliance +; +[logfiles] +; +; Format is: +; +; logger_name => [formatter]levels +; +; The name of the logger dictates not only the name of the logging +; channel, but also its type. Valid types are: +; - 'console' - The root console of Asterisk +; - 'syslog' - Linux syslog, with facilities specified afterwards with +; a period delimiter, e.g., 'syslog.local0' +; - 'filename' - The name of the log file to create. This is the default +; for log channels. +; +; Filenames can either be relative to the standard Asterisk log directory +; (see 'astlogdir' in asterisk.conf), or absolute paths that begin with +; '/'. +; +; An optional formatter can be specified prior to the log levels sent +; to the log channel. The formatter is defined immediately preceeding the +; levels, and is enclosed in square brackets. Valid formatters are: +; - [default] - The default formatter, this outputs log messages using a +; human readable format. +; - [plain] - The plain formatter, this outputs log messages using a +; human readable format with the addition of function name +; and line number. No color escape codes are ever printed +; nor are verbose messages treated specially. +; - [json] - Log the output in JSON. Note that JSON formatted log entries, +; if specified for a logger type of 'console', will be formatted +; per the 'default' formatter for log messages of type VERBOSE. +; This is due to the remote consoles interpreting verbosity +; outside of the logging subsystem. +; +; Log levels include the following, and are specified in a comma delineated +; list: +; debug +; trace +; notice +; warning +; error +; verbose() +; dtmf +; fax +; security +; +; +; Verbose takes an optional argument, in the form of an integer level. The +; verbose level can be set per logfile. Verbose messages with higher levels +; will not be logged to the file. If the verbose level is not specified, it +; will log verbose messages following the current level of the root console. +; +; Debug has multiple levels like verbose. However, it is a system wide setting +; and cannot be specified per logfile. You specify the debug level elsewhere +; such as the CLI 'core set debug 3', starting Asterisk with '-ddd', or in +; asterisk.conf 'debug=3'. +; +; Special level name "*" means all levels, even dynamic levels registered +; by modules after the logger has been initialized (this means that loading +; and unloading modules that create/remove dynamic logger levels will result +; in these levels being included on filenames that have a level name of "*", +; without any need to perform a 'logger reload' or similar operation). +; Note that there is no value in specifying both "*" and specific level names +; for a filename; the "*" level means all levels. The only exception is if +; you need to specify a specific verbose level. e.g, "verbose(3),*". +; +; We highly recommend that you DO NOT turn on debug mode if you are simply +; running a production system. Debug mode turns on a LOT of extra messages, +; most of which you are unlikely to understand without an understanding of +; the underlying code. Do NOT report debug messages as code issues, unless +; you have a specific issue that you are attempting to debug. They are +; messages for just that -- debugging -- and do not rise to the level of +; something that merit your attention as an Asterisk administrator. Both +; debug and trace messages are also very verbose and can and do fill up +; logfiles quickly. This is another reason not to have debug or trace +; modes on a production system unless you are in the process of debugging +; a specific issue. +; +;debug.log => error,warning,notice,verbose,debug +;trace.log => trace +;security.log => security +console => notice,warning,error +;console => notice,warning,error,debug +messages.log => [default]notice,warning,error,verbose +;full.log => notice,warning,error,debug,verbose,dtmf,fax + +;~ +;full.log => [default]notice,warning,error,debug,verbose,dtmf,fax + +; +;full-json.log => [json]debug,verbose,notice,warning,error,dtmf,fax +; +;syslog keyword : This special keyword logs to syslog facility +; +;syslog.local0 => notice,warning,error +; +; A log level defined in 'custom_levels' above +;important.log = important diff --git a/asterisk/conf/mobile/modules.conf b/asterisk/conf/mobile/modules.conf new file mode 100644 index 0000000..ee663a6 --- /dev/null +++ b/asterisk/conf/mobile/modules.conf @@ -0,0 +1,15 @@ +; +; /etc/asterisk/modules.conf +; +; This is the same as the sample but without text. +; +[modules] +autoload=yes + +noload = chan_alsa.so +noload = res_hep.so +noload = res_hep_pjsip.so +noload = res_hep_rtcp.so +noload = chan_sip.so +noload = app_voicemail_imap.so +noload = app_voicemail_odbc.so diff --git a/asterisk/conf/mobile/quectel.conf b/asterisk/conf/mobile/quectel.conf new file mode 100644 index 0000000..e74d1a6 --- /dev/null +++ b/asterisk/conf/mobile/quectel.conf @@ -0,0 +1,93 @@ +[general] + +interval=30 ; Number of seconds between trying to connect to devices +smsdb=/var/lib/asterisk/smsdb +csmsttl=600 + +;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- +;jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a + ; Quectel channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The Quectel channel can't accept jitter, + ; thus an enabled jitterbuffer on the receive Quectel side will always + ; be used if the sending side can create jitter. + +;jbforce = no ; Forces the use of a jitterbuffer on the receive side of a Quectel + ; channel. Defaults to "no". + +;jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + +;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + +;jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a Quectel + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmaxsize) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + +;jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set. + ; The option represents the number of milliseconds by which the new jitter buffer + ; will pad its size. the default is 40, so without modification, the new + ; jitter buffer will set its size to the jitter value plus 40 milliseconds. + ; increasing this value may help if your network normally has low jitter, + ; but occasionally has spikes. + +;jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". +;----------------------------------------------------------------------------------- + +[defaults] +; now you can set here any not required device settings as template +; sure you can overwrite in any [device] section this default values + +context=quectel-incoming ; context for incoming calls +group=0 ; calling group +rxgain=0 ; increase the incoming volume; may be negative +txgain=0 ; increase the outgoint volume; may be negative +autodeletesms=yes ; auto delete incoming sms +resetquectel=yes ; reset quectel during initialization with ATZ command +u2diag=-1 ; set ^U2DIAG parameter on device (0 = disable everything except modem function) ; -1 not use ^U2DIAG command +usecallingpres=yes ; use the caller ID presentation or not +callingpres=allowed_passed_screen ; set caller ID presentation by default use default network settings +disablesms=no ; disable of SMS reading from device when received + ; chan_quectel has currently a bug with SMS reception. When a SMS gets in during a + ; call chan_quectel might crash. Enable this option to disable sms reception. + ; default = no + +language=en_GB ; set channel default language +mindtmfgap=45 ; minimal interval from end of previews DTMF from begining of next in ms +mindtmfduration=80 ; minimal DTMF tone duration in ms +mindtmfinterval=200 ; minimal interval between ends of DTMF of same digits in ms + +callwaiting=auto ; if 'yes' allow incoming calls waiting; by default use network settings + ; if 'no' waiting calls just ignored +disable=no ; OBSOLETED by initstate: if 'yes' no load this device and just ignore this section + +initstate=start ; specified initial state of device, must be one of 'stop' 'start' 'remote' + ; 'remove' same as 'disable=yes' + +exten=+1234567890 ; exten for start incoming calls, only in case of Subscriber Number not available!, also set to CALLERID(ndid) + +dtmf=relax ; control of incoming DTMF detection, possible values: + ; off - off DTMF tones detection, voice data passed to asterisk unaltered + ; use this value for gateways or if not use DTMF for AVR or inside dialplan + ; inband - do DTMF tones detection + ; relax - like inband but with relaxdtmf option + ; default is 'relax' by compatibility reason + +; quectel required settings +[quectel0] +exten=+447123456789 + +audio=/dev/ttyUSB1 ; tty port for audio connection; no default value +data=/dev/ttyUSB2 ; tty port for AT commands; no default value + +; or you can omit both audio and data together and use imei=123456789012345 and/or imsi=123456789012345 +; imei and imsi must contain exactly 15 digits ! +; imei/imsi discovery is available on Linux only +;imei=123456789012345 +;imsi=123456789012345 + +; if audio and data set together with imei and/or imsi audio and data has precedence +; you can use both imei and imsi together in this case exact match by imei and imsi required diff --git a/asterisk/samples/conf/asterisk.conf.sample b/asterisk/samples/basic/asterisk.conf.sample similarity index 100% rename from asterisk/samples/conf/asterisk.conf.sample rename to asterisk/samples/basic/asterisk.conf.sample diff --git a/asterisk/samples/conf/logger.conf.sample b/asterisk/samples/basic/logger.conf.sample similarity index 100% rename from asterisk/samples/conf/logger.conf.sample rename to asterisk/samples/basic/logger.conf.sample diff --git a/asterisk/samples/conf/modules.conf.sample b/asterisk/samples/basic/modules.conf.sample similarity index 100% rename from asterisk/samples/conf/modules.conf.sample rename to asterisk/samples/basic/modules.conf.sample diff --git a/asterisk/samples/conf/pjsip_wizard.conf.sample b/asterisk/samples/basic/pjsip_wizard.conf.sample similarity index 100% rename from asterisk/samples/conf/pjsip_wizard.conf.sample rename to asterisk/samples/basic/pjsip_wizard.conf.sample diff --git a/asterisk/samples/conf/res_stun_monitor.conf.sample b/asterisk/samples/basic/res_stun_monitor.conf.sample similarity index 100% rename from asterisk/samples/conf/res_stun_monitor.conf.sample rename to asterisk/samples/basic/res_stun_monitor.conf.sample diff --git a/asterisk/samples/conf/voicemail.conf.sample b/asterisk/samples/basic/voicemail.conf.sample similarity index 100% rename from asterisk/samples/conf/voicemail.conf.sample rename to asterisk/samples/basic/voicemail.conf.sample diff --git a/asterisk/samples/mobile/quectel.conf.sample b/asterisk/samples/mobile/quectel.conf.sample new file mode 100644 index 0000000..2bf9342 --- /dev/null +++ b/asterisk/samples/mobile/quectel.conf.sample @@ -0,0 +1,91 @@ +[general] + +interval=15 ; Number of seconds between trying to connect to devices +smsdb=/var/lib/asterisk/smsdb +csmsttl=600 + +;------------------------------ JITTER BUFFER CONFIGURATION -------------------------- +;jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a + ; Quectel channel. Defaults to "no". An enabled jitterbuffer will + ; be used only if the sending side can create and the receiving + ; side can not accept jitter. The Quectel channel can't accept jitter, + ; thus an enabled jitterbuffer on the receive Quectel side will always + ; be used if the sending side can create jitter. + +;jbforce = no ; Forces the use of a jitterbuffer on the receive side of a Quectel + ; channel. Defaults to "no". + +;jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds. + +;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is + ; resynchronized. Useful to improve the quality of the voice, with + ; big jumps in/broken timestamps, usually sent from exotic devices + ; and programs. Defaults to 1000. + +;jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a Quectel + ; channel. Two implementations are currently available - "fixed" + ; (with size always equals to jbmaxsize) and "adaptive" (with + ; variable size, actually the new jb of IAX2). Defaults to fixed. + +;jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set. + ; The option represents the number of milliseconds by which the new jitter buffer + ; will pad its size. the default is 40, so without modification, the new + ; jitter buffer will set its size to the jitter value plus 40 milliseconds. + ; increasing this value may help if your network normally has low jitter, + ; but occasionally has spikes. + +;jblog = no ; Enables jitterbuffer frame logging. Defaults to "no". +;----------------------------------------------------------------------------------- + +[defaults] +; now you can set here any not required device settings as template +; sure you can overwrite in any [device] section this default values + +context=default ; context for incoming calls +group=0 ; calling group +rxgain=0 ; increase the incoming volume; may be negative +txgain=0 ; increase the outgoint volume; may be negative +autodeletesms=yes ; auto delete incoming sms +resetquectel=yes ; reset quectel during initialization with ATZ command +u2diag=-1 ; set ^U2DIAG parameter on device (0 = disable everything except modem function) ; -1 not use ^U2DIAG command +usecallingpres=yes ; use the caller ID presentation or not +callingpres=allowed_passed_screen ; set caller ID presentation by default use default network settings +disablesms=no ; disable of SMS reading from device when received + ; chan_quectel has currently a bug with SMS reception. When a SMS gets in during a + ; call chan_quectel might crash. Enable this option to disable sms reception. + ; default = no + +language=en ; set channel default language +mindtmfgap=45 ; minimal interval from end of previews DTMF from begining of next in ms +mindtmfduration=80 ; minimal DTMF tone duration in ms +mindtmfinterval=200 ; minimal interval between ends of DTMF of same digits in ms + +callwaiting=auto ; if 'yes' allow incoming calls waiting; by default use network settings + ; if 'no' waiting calls just ignored +disable=no ; OBSOLETED by initstate: if 'yes' no load this device and just ignore this section + +initstate=start ; specified initial state of device, must be one of 'stop' 'start' 'remote' + ; 'remove' same as 'disable=yes' + +exten=+1234567890 ; exten for start incoming calls, only in case of Subscriber Number not available!, also set to CALLERID(ndid) + +dtmf=relax ; control of incoming DTMF detection, possible values: + ; off - off DTMF tones detection, voice data passed to asterisk unaltered + ; use this value for gateways or if not use DTMF for AVR or inside dialplan + ; inband - do DTMF tones detection + ; relax - like inband but with relaxdtmf option + ; default is 'relax' by compatibility reason + +; quectel required settings +[quectel0] +audio=/dev/ttyUSB1 ; tty port for audio connection; no default value +data=/dev/ttyUSB2 ; tty port for AT commands; no default value + +; or you can omit both audio and data together and use imei=123456789012345 and/or imsi=123456789012345 +; imei and imsi must contain exactly 15 digits ! +; imei/imsi discovery is available on Linux only +imei=123456789012345 +imsi=123456789012345 + +; if audio and data set together with imei and/or imsi audio and data has precedence +; you can use both imei and imsi together in this case exact match by imei and imsi required